Gas Chromatograph, Hewlett Packard 5890A, with MS configuration

GC 3

item number G7

	Gas Chromatograph, Hewlett Packard 5890A, with MS configuration
	Refurbished with a six month warranty
	Data units (Integrator or ChemStation software and computer) are available at extra cost.
	Various versions of software and operating systems are available.
	Autosampler with controller is available at extra cost

Support / Compatibility Matrix

GE/GC/LC/UV-VIS/A to D ChemStation Revision A.04.0x - A.10.0x

ChemStation Rev.	A.04.0x	A.05.0x	A.06.0x	A.07.0x	A.08.0x	A.09.0x	A.10.0x
Windows 95	Yes	Yes	Yes	No	No	No	No
Windows NT	No	Yes	Yes	Yes	Yes	Yes	No
Windows 98	No	No	No	No	No	No	No
Windows ME	No	No	No	No	No	No	No
Windows 2000	No	No	No	No	Yes	Yes	Yes
Windows XP	No	No	No	No	No	No	Yes

Temperature range	ambient +7'C to 400'C, with luquid N2 cryogenic coolint to -80'C
Temperature programmable	to three ramps, 0 to 70'C/min in 0.1'C/min increments
Oven temperature recalibration	by the user
User-defined	oven temperature equilibration time

Inlet Systems

Packed Column	1/4 glass, 1/8 metal or HP 530u capillary
Split/Splitless	fused silica or glass or HP 530u capillary
Split Only	fused silica or glass or HP 530u capillary
dedicated on column	HP 530u capillary

Other features

	flow sensing
	single column compensation
	stopwatch and run timer
	service diagnostics
	memory powerfail protection
	Internal valve control

Overview

Keyboard and alphanumeric display to permit defining instrument set points quickly.

Two channels of electronic flow sensing make setting carrier gas flow rates as easy. The flow sensor saves time in set-up and permits monitoring flow rate during analyses.

Heated zone values, oven temperature, flow sensor readings, or stored column compensation baseline profiles can be assigned to an analog output channel. As a troubleshooting aid, a permanently stored test chromatogram is available to aid in snsuring proper operation of connected data-handling devices.

An AINET@ (Instrument Network) feature permits interfacing the HP 5890A to an integrator and automatic liquid sampler. INET is a digital interface permitting an integrator, for example an HP 3392A, to receive digital detector data,and to receive and transmit chromatographic setpoints.

Information is provided to aid in isolating chemical, mechanical, or electronic problems.

Built-in diagnostics and comprehensive self-tests are included to aid in diagnosing electronic problems.

functional area on the main electronics board are clearly labelled: For example, areas such as A/D and D/A logic, the CPU and clocks are readily identified. For easy identification, components are clearly labelled.

Hardware assemblies are quickly accessible using only a pozidriv screwdriver and nut driver.

Place order on line, we will contact you to make all necessary arrangements, or call:

Name
Company
Street
City
State/Province
Zip Code
Country
E-mail
Tel
FAX
Your preferred method of payment
How would you like to be contacted?